Closed Projects
Click on a link below to see a one page description of Ma2JIC's closed projects.
- Adaptive Welding for Power Plant Piping and Pressure Vessels (AW-PPV)
- Advanced Gas-Metal Arc Welding
- Application of Computational Thermodynamics and Kinetics to the Study of Weld Microstructure
- Assessment of Satoh Test as a Means to Understand Stress Relaxation Cracking Susceptibility
- Cast Pin Tear Test Repeatability & Validation
- Characterization of Laser Power Bed Fusion (L-PBF) Additive Manufacturing (AM) and Heat Treatment
- Computational Process Modeling for Additive Manufacturing
- Creep Life Performance of Cr-Mo Welds
- Design Rules for Solid-State Join-Ability of High Temperature Structural Alloys-Extended
- Development of a Weldability Testing Procedure for Laser Powder-Bed Fusion Applications
- Development of Microhardness Acceptance Criteria for Temper Bead Weld Qualification
- Dissimilar Metal Welds for Power Generation Applications
- Dissimilar Metal Welds for Subsea Service under Cathodic Protection
- Effect of interstitial elements on the weldability of nickel base alloys
- Effect of Interstitial Elements on the Weldability of Nickel Base Alloys
- Effect of Niobium on Weld Metal Microstructure and Properties in Submerged Arc Welded X70 Steel (previously Effect of Niobium on Weld Metal and Heat-affected Zone Toughness of Pipeline Steels)
- Effect of Postweld Heat Treatment on the Properties of Steel Clad with Alloy 625 for Petrochemical Applications
- Evaluation of Advanced Pulsed Waveforms On Arc Welding Efficiency
- External Weld Repair for Coke Drums
- Ferritic and Austenitic Welds in High Strength Steels: Metallurgical Characterization and Weldability Evaluation
- ICWE Predictive Tools for FSW – from Process to Performance
- Improving Fatigue Life of LENS Deposited Ti-6Al-4V through Microstructure and Process Control
- Innovative Fabrication and Repair of Aerospace Invar Molds using Large Scale Additive Metals Manufacturing Methods
- Integrated Modeling Framework for Automotive Multi-process Joining
- Joining and Repair of Additive Manufactured Components
- Large-Scale Additive Manufacturing of Dissimilar Materials (LSAMM)
- Laser Weldability of Austenitic Nickel Alloys
- Laser Welding Behavior of Additive Manufactured 304L Stainless Steel- Phase II
- Low Oxygen Weld Metal in Hot Wire GTA Welded HSLA Steel
- Low Transformation Temperature Welding Research
- Metallurgical and Mechanical Property Characterization of AM 304L Stainless Steel
- Metallurgical Characterization of Dissimilar Metal Welds Between F65 Steel and Low Alloy Steel Overlays With Alloy 625 Filler Metal (phase II)
-
Metal-Polymer Composite Joining
- Nano-brazing for Electronic Packaging and Lightweight Metal Bonding
- Precipitate evolution in Cr-Mo steel welds
- Repair of Additive Manufactured Products by Electro-Spark Deposition
- Stress Relaxation Cracking (Alexandrov)
- Stress Relaxation Cracking Phase I
- Stress Relief Cracking and Strain Ageing in 347H and In 740H
- The Influence of Multiple Weld Thermal Cycles on the Mechanical Properties of Copper Strengthened High Strength Low Alloy Steels
- Thermal-Sprayed Cladding Optimization for Steel Drill Pipes
- Waveform Controlled Gas Metal Arc Welding of Corrosion Resistant Alloys Without Back-Purging
- Weldability Evaluation in Autogenous Welds of Alloys 230, 825, and 800H; Computational modeling of Creep-fatigue behavior of Alloy 230
- Weldability of Alloy 740H for AUSC Steam Applications
- Weldability of FeMnAl Alloys for Armor Applications
- Welding of high temperature shape memory alloys: a feasibility study
- Wide Gap Nickel Superalloy Braze during Gas Turbine Repair
- Zinc Effects of Mechanical Behavior of AHSS Welds